P
給兩位貴客上茶。氯丁橡膠止水帶價格。背貼式橡膠止水帶。/P施工單位如何進行鋼板止水帶進行接口處理:。
P按材質可分為：天然橡膠止水帶、氯丁橡膠止水帶、三元乙丙橡膠止水帶。 According to the material can be divided into: natural rubber waterproof belt, neoprene waterproof belt, three yuan ethylene propylene rubber waterproof belt. /P
P氯丁橡膠止水帶價格。按型號可分為：CB型橡膠止水帶（埋入式中間有孔型）；CP型橡膠止水帶（埋入式中間無孔型）；EB型橡膠止水帶（外貼式中間有孔型）；EP型橡膠止水帶（外貼式中間無孔型）。 /P
PAccording to the model can be divided into: CB type rubber sealing tape embedded in the middle pass CP rubber sealing tape embedded in the middle of non pass EB rubber waterproof tape external paste type in the middle pass EP type rubber waterproof tape external type of intermediate non pass. /P
P按使用情況可分為：中埋式橡膠止水帶和背貼式橡膠止水帶外貼式橡膠止水帶、鋼邊橡膠止水帶、遇水膨脹橡膠止水帶、平板式止水帶。/P
P According to the use situation can be divided into: buried rubber water stop and back affixed rubber waterproof tape external rubber sealing tape, steel edge rubber water stop, water swelling rubber water stop, flat type water stop belt./P
P 橡膠止水帶的使用溫度： /P
PService temperature of rubber water stop: /P
P溫度使用范圍-45℃ - +60℃。當溫度超過+70℃，以及強烈的氧化作用或受油類等有機溶劑侵蝕時，均不得使用該產品。/P
P The range of temperature is -45 - +60 - C. This product should not be used when the temperature is higher than +70 degrees, and it is strongly oxidized or eroded by organic solvents such as oil. /P
P橡膠止水帶常用規格：/P
P Specifications of rubber water stop belt: /P
P常用寬度（mm）：230、250、280、290、300、350、400、450、500等。特殊規格可定做。 Commonly used width mm: 230, 250, 280, 290, 300, 350, 400, 450, 500 and so on. Special specifications can be customized. 常用厚度（mm）：6、7、8、10mm等。 Commonly used thickness mm: 6, 7, 8, 10mm and so on. 包裝：20m/卷、30m/卷。也可根據客戶要求定做。 Packing: 20m/ volume, 30m/ volume. Can also be customized according to customer requirements. /P
P橡膠止水帶的應用：/P
P Application of rubber water stop belt: /P
P主要用于地下構筑物、水壩、貯水池、游泳池、屋面及其它建筑物和構筑物的施工縫及變形縫防水。 /P
PIt is mainly used for underground construction, dam, storage tank, swimming pool, roof and other buildings and structures of construction joints and deformation joints waterproof./P
P
多謝韓公子告訴彩環和四娘的下落。氯丁橡膠止水帶價格。水池伸縮縫橡膠止水帶。/P
橡膠止水帶主要適用于變形縫用止水帶，用 B 表示；適用于施工縫用止水帶，用 S 表示；適用于有特殊耐老化要求的接縫用止水帶用 J 表示。 歡迎廣大客戶使用我公司的系列止水帶產品 橡膠止水帶作用與原理橡膠橡膠止水帶的質量達到GB18173.2-2000要求的中埋式橡膠止水帶背貼式橡膠止水帶是利用橡膠的高彈性和壓縮變形性的特點，在各種載荷下產生彈性變形，從而起到有緊固密封，防止建筑結構的漏水、滲水及減震緩沖作用。。
