高模量聚硫密封膠我公司生產可安客戶要求加工生產
通用名稱:聚硫建筑密封膏(膠),雙組份聚硫防水密封膠(膏),PS852雙組份聚硫密封膠(膏),PG321雙組份聚硫密封膠(膏),SGJL-851雙組份聚硫密封膏(膠)
General name: polysulfide building seal paste glue, two component polysulfide waterproof sealant paste, PS852 two component polysulfide sealant paste, PG321 two component polysulfide sealant paste, SGJL-851 two component polysulfide sealing paste glue.
分類:a、按照流動性可分為非下垂型(N)和自流平型(L)兩個類型;
Classification: A, according to the liquidity can be divided into non droop type N and self leveling L type two
b、按照位移能力可分為25、20兩個級別;
B, according to the displacement capacity, can be divided into 25, 20 and two levels.
c、按照拉伸模量可分為高模量(HM)和低模量(LM)兩個次級別:
C, according to the tensile modulus, can be divided into two sub levels: high modulus HM and low modulus LM.
種是非下垂型雙組份聚硫密封膠,外觀為細膩、均勻膏狀物或粘稠體,適用于各種水泥建筑物變形縫,無論建筑物的變形縫是立縫、地縫、還是頂縫、都適用,這種硫密封被涂到建筑物的立縫或者頂縫上以后,不會出現密封膠流淌從施工縫中掉下來的現象,而是直接就粘到上面。
The first one is non droop type two-component polysulfide sealant, the appearance of fine and uniform paste or viscous body, suitable for all kinds of cement building deformation joint, deformation joint of building is both vertical seam and seam or seams, the top are applicable, since the sulfur sealing is applied to the vertical seam or buildings the top slot, does not appear in the fall of the sealant flowing from the phenomenon of construction joints, but directly sticking to them.
第二種是自流平型雙組份聚硫密封膠,外觀為水狀液體膠裝物,向水一樣,能夠在變形縫里流淌,比較稀,它只適用于水泥建筑物變形縫的地縫,具有流淌性,將其按比例配比好以后,直接灌到地縫里,能夠流淌到建筑物變形縫里,在施工建筑物平面的地縫時,用自流平型雙組份密封膠會省時省力
The second is self leveling two-component polysulfide sealant, the appearance of water like liquid glue, like water to flow, can the deformation joints, relatively thin, it is only suitable for the cement building deformation joint seam, with the flow, according to the proportion after directly poured into seam where can flow to the building distortion seam, construction of buildings in the plane of the seam, with self leveling two-component sealant can save time and effort
產品特點:
Product features:
l、粘結性:聚硫密封膠對水泥、鋼鐵、玻璃、木材、天然石材等都有較好的粘結性。一般建筑及水利工程上宜使用低模量、高伸長的聚硫密封膠,其粘結強度≥0.2Mpa,伸長率≥300%。
L, cohesiveness: polysulfide sealant has good adhesion to cement, steel, glass, wood, natural stone and so on. The general construction and water conservancy project should use the low modulus and high elongation of polysulfide sealant, the bond strength is more than 0.2Mpa, elongation is greater than or equal to 300%.
2、耐水性:聚硫密封膠對海水、自來水、蒸餾水的作用是穩定的,相比之下對海水含鹽的重量變化小。
2. Water resistance: the effect of polysulfide sealant on sea water, tap water and distilled water is stable, and the weight change of seawater salt is the smallest.
3、耐酸、堿性能:聚硫密封膠不耐濃酸、堿。但對稀的無機酸、堿及各種鹽類還是穩定的。
3, acid and alkali resistance: polysulfide sealant is not resistant to concentrated acid and alkali. But the rare inorganic acids, bases and various salts are still stable.
4、耐熱老化性能:聚硫密封膠熱老化性能很好,可長期在一40℃~120℃的條件下工作。
4. Heat aging properties: polysulfide sealant has good thermal aging performance and can work at 40 - 120 C for a long time.
5、耐輻射性能良好:聚硫密封膠耐r_射線的性能非常好。
5, good radiation resistance: polysulfide sealant resistance to r_ ray performance is very good.
6、無毒性:雖然液體聚硫密封膠有點硫磺的嗅臭味,但固化后逐漸被填料所吸附。我公司生產的聚硫密封膠經預防醫學科學院環境與衛生工程研究所測試其L,D50 20g/kg。根據毒性分級標準屬無毒級。
6. Nontoxic: Although liquid polysulfide sealant has a smell of smell of sulfur, it is gradually adsorbed by packing after curing. The polysulfide sealant produced by our company has been tested by the Institute of environmental and health engineering of the Chinese Academy of preventive medicine Chinese Academy of Preventive Medicine L, D50 20g / kg. According to the national toxicity classification standard, it is nontoxic grade.
7、氣密性好:聚硫密封膠不但有良好的彈性,而且它的氣密性在彈性密封膠中也是的。目前已知各種膠中僅次于熱熔性的丁基膠。
7, good air tightness: polysulfide sealant not only has good elasticity, but also its gas tightness is also the best in elastic sealant. At present, after the hot melt butyl rubber adhesive in a variety of known.