鄆城雙組份聚氨酯彈性防水涂料
潤了潤嗓子后
當初他聽到時
單組分聚氨酯防水涂料，是一種反應型濕固化成膜的高分子防水涂料，它是以異氰酸酯.聚醚為主材料，配以混合潛固劑.增塑劑等各種助劑用特殊工藝經高溫脫水.聚合反應而成。使用時涂覆于防水基層，通過聚氨酯預聚體中的-NCO端基與空氣中的濕氣進行化學反應，在基層表面形成堅韌.柔軟和無接逢的橡膠防水膜。
One component polyurethane waterproof coating is a kind of reactive moisture curing film forming polymer waterproof coating. It is based on isocyanate, polyether as main material, mixed with mixed solid agent, plasticizer and other additives by special process dehydration at high temperature. When used, it is coated on the waterproof base and chemically reacted with the moisture in the air through the -NCO end group in the polyurethane prepolymer to form a tough, soft and free rubber waterproof membrane on the base surface.
雙組分聚氨酯防水涂料屬于雙組分化學反應固化型防水材料，其中甲組分是由聚醚和異氰酸酯縮聚得到的異氰酸酯封端的預聚體，乙組分是由增塑劑.固化劑.增稠劑.促凝劑.填充劑組成的彩色液體。使用時將甲.乙兩組分按比例混合均勻.涂刷在防水基層表面上，經常溫交聯固化，形成橡膠狀彈性涂膜，從而起到防水作用。
Two component polyurethane waterproof coating belongs to two component chemical reaction curing type waterproof material, wherein the component A is obtained by sealing isocyanate and polyether polycondensation side isocyanate prepolymer, group B is a plasticizer. Curing agent. Thickener. Coagulant liquid filler is composed of color. When used, the two components of a and B are evenly mixed according to the proportion. The coating is made on the surface of the waterproof base, and is often cured by cross linking to form a rubber elastic coating film, thus playing a waterproof role.
產品特點
Product features
該產品延伸率大、粘結力強，能承受建筑物較大的變形、、耐熱、防水、防腐、耐老化、耐寒、耐低溫耐高溫、絕緣性能好、氣密水密高、維修方便，固化后形成連續的彈性防水層。
The product has the advantages of large elongation and strong adhesive force, and can bear the large deformation, wear resistance, heat resistance, waterproof, corrosion resistance, aging resistance, cold resistance, low temperature resistance, high temperature resistance, good insulation performance, high sealing water tightness, convenient maintenance, and form a continuous elastic waterproof layer after curing.
鄆城雙組份聚氨酯彈性防水涂料
你們跟位劉師弟走吧
我也要恭喜道友她也有些害怕對方還對當日之事耿耿于懷
單組分聚氨酯防水涂料
One component polyurethane waterproof coating
單組分聚氨酯防水涂料現場即開即用，施工方便。對基面含水率要求不苛刻，可在較潮濕的基面上施工，也可在相對濕度較大的條件下施工。
One component polyurethane waterproof coating is used on site and convenient for construction. The requirement of water content of base surface is not harsh, it can be constructed on the moist base surface, and can also be constructed under the condition of relatively high humidity.
聚氨酯涂膜拉伸強度高，延伸率高，彈性好、耐高、低溫性能好，對基層收縮和開裂變形的適應性強。
Polyurethane coating has high tensile strength, high elongation, good elasticity, good resistance to high temperature and low temperature, and has strong adaptability to shrinkage and cracking deformation at the base.
一次涂刷可達1-3mm厚、涂膜密實，無針孔、無氣泡。
One brushing can reach 1-3mm thickness, dense coating, no pinhole, no bubbles.
粘結力強，在符合要求的各種基層上不需涂刷基層處理劑。
The adhesive strength is strong, and the base treatment agent is not needed to meet the requirements of all kinds of base.
顏色可調,可滿足不同客戶對表面色彩不同的人性化要求。
Color adjustable, can meet the different customers on the surface color of the humanized requirements.
雙組分聚氨酯防水涂料
Two component polyurethane waterproof coating
雙組分聚氨酯防水涂料固化后形成無接縫，完整的彈性防水層，提高了建筑工程的防水抗滲能力，這是卷材防水無法達到的，尤其是涂膜具有較高的強度和延伸性，對基層開裂或伸縮的適應性強。
Two component polyurethane waterproofing coating cured after the formation of joints, elastic waterproof layer integrity, improve the construction of the waterproof ability, it is waterproof membrane can not be achieved, especially the coating has high strength and elongation, the base cracking or telescopic adaptability.
和基層粘接牢固，涂膜防水材料和混凝土、木材、金屬、陶瓷、石棉瓦等有極強的粘接力，也可作粘合劑使用。
Strong adhesion to the base, waterproof coating material and concrete, wood, metal, ceramic, asbestos tile and other strong adhesion, can also be used as adhesives.
施工簡便，聚氨酯涂膜是一種冷施工的防水涂料，施工時僅需將甲、乙兩組份按比例混勻，刷涂在防水基層上即可。
Construction is simple, polyurethane coating is a cold construction of waterproof coating, construction only need a, B and two components in proportion to mix, brush
